Matrox - Rolodex
Description:
Universal 32-bit PCI card provides four digital (+analog?) outputs via two LFH-60 connectors. This is (likely) the card paired with the original prototype IDTech Bertha panels (9503-DG0 or T220) and was implemented to output four genlocked 960 x 2400 @41Hz stripes (40Hz?) Board design also provisions for an optional TV tuner to be installed (not pictured.)
Identifying Numbers:
908-06 REV A; MGI G2+/QUADP-PL
Onboard logic:
Intel 21152AB L029LZ30; Silicon Image Sil164CT64 (x4)
Universal 32-bit PCI card provides four digital (+analog?) outputs via two LFH-60 connectors. This is (likely) the card paired with the original prototype IDTech Bertha panels (9503-DG0 or T220) and was implemented to output four genlocked 960 x 2400 @41Hz stripes (40Hz?) Board design also provisions for an optional TV tuner to be installed (not pictured.)
Identifying Numbers:
908-06 REV A; MGI G2+/QUADP-PL
Onboard logic:
Intel 21152AB L029LZ30; Silicon Image Sil164CT64 (x4)
Description:
Universal 32-bit PCI card provides four digital (+analog?) outputs via two LFH-60 connectors. This is (likely) an updated version of the card above, paired with the original prototype and first revision IDTech Bertha panels (9503-DG0, 9503-DG1 or T220, T221) and was implemented to output four genlocked 960 x 2400 @41Hz stripes (40Hz?) Board design also provisions for an optional TV tuner to be installed (not pictured.)
Identifying Numbers:
908-09 REV A; G200 MMS(?)
Onboard logic:
Intel S21152BB L403EA12; Silicon Image Sil164CT64 (x4)
Universal 32-bit PCI card provides four digital (+analog?) outputs via two LFH-60 connectors. This is (likely) an updated version of the card above, paired with the original prototype and first revision IDTech Bertha panels (9503-DG0, 9503-DG1 or T220, T221) and was implemented to output four genlocked 960 x 2400 @41Hz stripes (40Hz?) Board design also provisions for an optional TV tuner to be installed (not pictured.)
Identifying Numbers:
908-09 REV A; G200 MMS(?)
Onboard logic:
Intel S21152BB L403EA12; Silicon Image Sil164CT64 (x4)
Description:
External DisplayPort splitter can be programmed to output to either two or three DisplayPort, DVI, or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2400 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go DP Edition; T2G-DP-MIF; F7361-04 REV.B
Onboard logic:
Altera Cyclone III EP3C25F324C6N G CCAAA1343A; IDT VPP1101 PNG Z1327J Panel Port; Parade DP501HDM A2 U08DST QLPA7 (x3)
External DisplayPort splitter can be programmed to output to either two or three DisplayPort, DVI, or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2400 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go DP Edition; T2G-DP-MIF; F7361-04 REV.B
Onboard logic:
Altera Cyclone III EP3C25F324C6N G CCAAA1343A; IDT VPP1101 PNG Z1327J Panel Port; Parade DP501HDM A2 U08DST QLPA7 (x3)
Description:
External DisplayPort splitter can be programmed to output to either two or three DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits will also work in some cases, e.g. 3 x 1280 x 2400 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go Digital SE; T2G-DP3D-IF; F7433-00 REV_A
Onboard logic:
IDT VMM1403NQG Z1152A I59325M; TI M430 F5503 25K C CVYV G4
External DisplayPort splitter can be programmed to output to either two or three DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits will also work in some cases, e.g. 3 x 1280 x 2400 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go Digital SE; T2G-DP3D-IF; F7433-00 REV_A
Onboard logic:
IDT VMM1403NQG Z1152A I59325M; TI M430 F5503 25K C CVYV G4
Description:
External DisplayPort splitter can be programmed to output to two DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2224 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
DualHead2Go Digital SE; D2G-DP2D-IF; F7432-02 REV_A
Onboard logic:
IDT VMM14032 ABG Z1336CH; TI M430 F5503 35K D D97P G4
External DisplayPort splitter can be programmed to output to two DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 / 2048 x 1152. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2224 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
DualHead2Go Digital SE; D2G-DP2D-IF; F7432-02 REV_A
Onboard logic:
IDT VMM14032 ABG Z1336CH; TI M430 F5503 35K D D97P G4
Description:
External DisplayPort splitter can be programmed to output to two DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2224 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
DualHead2Go Digital ME; D2G-DP2D-MIF; F7432-0101 REV_A
Onboard logic:
IDT VMM14032 ABG Z1145CH; TI M430 F5503 25K C CVYV G4
External DisplayPort splitter can be programmed to output to two DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200. Sending custom resolutions beyond these limits will also work in some cases, e.g. 2 x 1920 x 2224 for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
DualHead2Go Digital ME; D2G-DP2D-MIF; F7432-0101 REV_A
Onboard logic:
IDT VMM14032 ABG Z1145CH; TI M430 F5503 25K C CVYV G4
Description:
External VGA or DVI-DL splitter can be programmed to output to either two or three DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits does not work, though sending standard resolutions with custom refresh rates does. E.g. 41 Hz or 48 Hz for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go Digital Edition; T2G-D3D-IF; F7283-02 REV_A
Onboard logic:
Altera Cyclone II EP2C20F484C6N K CBD9Y1137 A; Intersil ISL98001CQZ -R5296 L1047DAAD; Silicon Image VastLane Sil163BCTG100 VP4349.1-18 1124 1.0 (x2); Silicon Image Sil164CTG64 V0C240.1-13 1127 0.2; Chrontel CH7301C-TF GUC 1135 MY6QC (x2); Analog Devices ADV7123 KSTZ140 #1136
External VGA or DVI-DL splitter can be programmed to output to either two or three DVI or VGA capable displays while appearing to the host system as a single logical display. Factory programming supports two displays up to 1920 x 1200 or three displays up to 1920 x 1080. Sending custom resolutions beyond these limits does not work, though sending standard resolutions with custom refresh rates does. E.g. 41 Hz or 48 Hz for use with the IBM T221 display. Full list of factory supported configurations can be found here (ext.)
Identifying Numbers:
TripleHead2Go Digital Edition; T2G-D3D-IF; F7283-02 REV_A
Onboard logic:
Altera Cyclone II EP2C20F484C6N K CBD9Y1137 A; Intersil ISL98001CQZ -R5296 L1047DAAD; Silicon Image VastLane Sil163BCTG100 VP4349.1-18 1124 1.0 (x2); Silicon Image Sil164CTG64 V0C240.1-13 1127 0.2; Chrontel CH7301C-TF GUC 1135 MY6QC (x2); Analog Devices ADV7123 KSTZ140 #1136